An exclusive Starter Kit from GOOBAND DOO that includes the fastest model of the Raspberry Pi family – The Raspberry Pi 3 Model B and everything you need to get up and running within minutes in the exciting world of Raspberry Pi!
The starter kit has all the accessories and features to help you build your favorite Raspberry Pi projects like an XBMC media center, retro gaming console, minecraft, ham radio, ADS-B receiver, programming with scratch. Just Plug and Play!
SoC: Broadcom BCM2837 64-bit system-on-chip
CPU: Quad Core ARM Cortex-A53 CPU cores clocked 1.2GHz
GPU:Broadcom VideoCore IV
RAM:1GB LPDDR2 (900MHz)
Networking:10/100 Ethernet, 2.4GHz 802.11BGN wireless Wifi
Bluetooth: Bluetooth 4.0 Classic, Bluetooth Low Energy
Storage: 32 GB microSD card
GPIO: 40-pin header, populated
Ports: HDMI, 3.5mm analogue audio-video jack, 4X USB 2.0, ethernet, Camera Serial Interface (CSI), Display Serial Interface (DSI)
What’s in the Box
1*Raspberry Pi 3 Model B SBC
1*5V 2.5A Power Adaptor with switch
1*32G SanDisk Micro SD Card preloaded with NOOBS
1*Superior black case designed for Raspberry Pi 3
1*Card Reader compatiable with USB-A&USB-C
1*High quality HDMI Cable
1*ABOX Raspberry Pi Quick Start Guide
Firmware can be used to update your TV Box device. However, please note that firmware is usually suitable to a specific hardware platform, and if you use it on another non-compatible device of TV box, you may brick your device. For TV Box with Amlogic CPU, you should know this useful tool: Amlogic USB Burning Tool.
Firmware upgrade with USB Burning Tool
This method is used for most firmware distributed online. If you have a single firmware file, normally an .img file or extension, you need to use another Windows tool called USB Burning Tool. If for some reasons, your firmware is badly damaged, and can’t access the recovery mode, that may be the only way to unbrick your board. Follow the steps below.