* Power Supply: 100-240V, AC 50/60 Hz
* Power: 50W
* Lumen: 2000
* Lamp: LED
* Lamp Life: 50000 hours
* Work Noise: =<15dB
* Native Resolution: 800*480, compatible for 1920*1080p
* Contrast Ratio: 2000:1
* Aspect Ratio: 4:3/16:9
* Image: Support JPG, PNG,BMP. Support image zoom, 360 degrees flip and full screen.
1. Enhanced LED Light Technology * Double Brighter than ordinary LED
*For LCD projectors, the most important part is the LED light inside.
*This T22 mini projector adopted the lasted upgraded LED technology, provides more brightness than ordinary LED projector with 2000 Lumens. In dark room you will enjoy sharp image.
2. Large Screen Experience-Relax your eyes from TV
*Support projection size from 32 to 176 inches, the best projection distance is 2m with projection size about 80 inches.
*You may enjoy large screen while protecting your eyes.
3. Dial type keystone adjustable mechanism & patent dial wheel lens focus mechanism
*You can adjust the image manually with this function, picture proportion is not distortion after adjustment.
*In case the mini projector is placed in a tilt level, the picture quality will not be affected.
1.This projector mainly be used for Home cinema and gaming.Not recommended for PPT, word, excel or business presentation.
2.Please note that it only provides clear image in dark room.
1x GooBang Doo T22 Projector
1x HDMI cable
1x Remote controller
1x Use manual
1x 3 in 1 AV cable
1x Power adapter
Firmware can be used to update your TV Box device. However, please note that firmware is usually suitable to a specific hardware platform, and if you use it on another non-compatible device of TV box, you may brick your device. For TV Box with Amlogic CPU, you should know this useful tool: Amlogic USB Burning Tool.
Firmware upgrade with USB Burning Tool
This method is used for most firmware distributed online. If you have a single firmware file, normally an .img file or extension, you need to use another Windows tool called USB Burning Tool. If for some reasons, your firmware is badly damaged, and can’t access the recovery mode, that may be the only way to unbrick your board. Follow the steps below.