OS: Android 5.1 Lollipop
CPU: 64 Bit Amlogic S905 Quad-Core Cortex-A53@2.0GHz，DDR3 1G RAM + Flash 8GB ROM
GPU: Octo-Core Mali-450，frequency 600MHz with HDMI 2.0 output.
WiFi: WiFi 802.11b/g/n
LAN Ethernet: 10/100M, standard RJ-45
Card reader: SD/SDHC/MMC cards
USB host: 4 High speed USB, Support USB DISK and USB HDD
Wireless：Support 802.11 b/g/n Wi-Fi at 2.4GHz
Power Supply: DC 5V/2A
Power Indicator (LED) Power ON :blue; Standby :Red
Support Decoder format: HD MPEG1/2/4,H.265,4K-HD, HD AVC/VC-1,RM/RMVB, Xvid/DivX3/4/5/6 ,RealVideo8/9/10
Support Media format: Avi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg
Support Music format: MP3/WMA/AAC/WAV/OGG/AC3/DDP/FLAC/APE
Support Photo format: HD JPEG/BMP/GIF/PNG/TIFF
Support Subtitle: SRT/SMI/SUB/SSA/IDX+USB
1 x GooBang Doo Master Android TV box
1 x Power Adapter
1 x HDMI Cable
1 x IR Remote Controller
1 x User Manual
1 x GooBang Doo Support Card
Firmware can be used to update your TV Box device. However, please note that firmware is usually suitable to a specific hardware platform, and if you use it on another non-compatible device of TV box, you may brick your device. For TV Box with Amlogic CPU, you should know this useful tool: Amlogic USB Burning Tool.
Firmware upgrade with USB Burning Tool
This method is used for most firmware distributed online. If you have a single firmware file, normally an .img file or extension, you need to use another Windows tool called USB Burning Tool. If for some reasons, your firmware is badly damaged, and can’t access the recovery mode, that may be the only way to unbrick your board. Follow the steps below.