How to Install Cellar Door TV Build with Screenshots

Callardoor TV Build is one of the best Kodi 17.3 or 17.4 builds that is currently out. It is easy to navigate and fast.

It is a Build that will work with any device from Windows to an Android TV box.

It includes the all top popular add-on such as Covenant, Stream Army, Bob Unleashed, Poseidon, Bennu, Elysium. Dr stream Fork, Picasso, Quantum and many more.

Using a good VPN with Kodi is always suggested for privacy and security. If you need a good low cost VPN to use with Kodi Try IPVanish it has multiple high speed servers with no throttling or logs.
Be sure to have the Unknown Source box checked as Kodi 17 requires this before installing 3rd party add-ons. Read Here for how to Enable Unknown Sources option.

Steps to Install Cellar Door TV Build with Screenshots
Step 1) From Home Screen go to Settings

Step 2) Click File Manager

Step 3) Click Add Source

Step 4) Click None

Step 5) Enter the following Address:

Step 6) Name CDTV

Step 7) The boxes should match the picture below

Step 8) Go back to Home Screen and click Add-ons

Step 9) the add-on browser from the top left

Step 10) Click install from zip file

Step 11) Click CDTV

Step 12) Click

Step 13) It will pop up CellarDoorTV Wizard Enabled

Step 14) Go back to Home Screen and Click Add-ons

Step 15) Click Program Add-ons

Step 16) Click Cellar door TV Builds

Step 17) Click Infusion Krypton

Step 18) Click Standard Install

Step 19) Click Yes Install

Step 20) It will download and install

Step 21) Click Force Close

Step 20) After it installs restart Kodi and it should come up. Be sure to give it time to build menus and update add-ons.




Firmware can be used to update your TV Box device. However, please note that firmware is usually suitable to a specific hardware platform, and if you use it on another non-compatible device of TV box, you may brick your device. For TV Box with Amlogic CPU, you should know this useful tool: Amlogic USB Burning Tool.

Firmware upgrade with USB Burning Tool

This method is used for most firmware distributed online. If you have a single firmware file, normally an .img file or extension, you need to use another Windows tool called USB Burning Tool. If for some reasons, your firmware is badly damaged, and can’t access the recovery mode, that may be the only way to unbrick your board. Follow the steps below.

Know more:
How to Download Amlogic USB Burning Tool
How to Install the Amlogic USB Burning Tool on your PC
Step by step! How to Use the Amlogic USB Burning Tool to Flash Firmware

  • Best Cheap 4GB RAM Windows Laptops
  • Best Cheap 8GB RAM Windows Laptops
  • Best Cheap 16GB RAM Windows Laptops
  • Best 13.3 inch Laptops 2017
  • Best 14 inch Laptops 2017
  • Best Cheap 14.1 inch Laptops 2017
  • Best 15.6 inch Laptops 2017