Ebony is one of the amazing Kodi Builds from Wookie Wizard and uses Aeon Nox interface Skin settings.
This Build has sections for Movies, TV Shows, On The Box, Kids, All in One, Sports, Music and Add-ons.
It has also sections for the top most popular add-ons such as Covenant, Bennu, BOB Unleashed and UK Turk Playlists.
Using a good VPN with Kodi is always suggested for privacy and security. If you need a good low cost VPN to use with Kodi Try IPVanish it has high speed servers with no throttling or logs.
Be sure to have the Unknown Source box checked as Kodi 17 requires this before installing 3rd party add-ons. Read Here for how to Enable Unknown Sources option.
Steps to Install Ebony Kodi Build with Screenshots
Step 1) From home screen go to Settings
Step 2) Click File Manager
Step 3) Click Add Source
Step 4) Click None
Step 5) Enter the following address: http://wookiespmc.com/wiz/
Step 6) Name it Wookie
Step 7) The boxes should match the picture below
Step 8) Go back to Home screen and click add-ons
Step 9) Click the add-on browser from the top left
Step 10) Click Install from zip file
Step 11) Click wookie
Step 12) Click me-succumb To the Wookie.zip
Step 13) It will pop up Wookie Add-on Enabled
Step 14) Go back to home screen and click add-ons
Step 15) Click Program Add-ons
Step 16) Click Wookie
Step 17) Click Community Builds
Step 18) Select Ebony Krypton and click install
Step 19) Click Continue
Step 20) It will download and install
Step 21) After it installs restart Kodi and it should come up. Be sure to give it time to build menus and update add-ons.
Firmware can be used to update your TV Box device. However, please note that firmware is usually suitable to a specific hardware platform, and if you use it on another non-compatible device of TV box, you may brick your device. For TV Box with Amlogic CPU, you should know this useful tool: Amlogic USB Burning Tool.
Firmware upgrade with USB Burning Tool
This method is used for most firmware distributed online. If you have a single firmware file, normally an .img file or extension, you need to use another Windows tool called USB Burning Tool. If for some reasons, your firmware is badly damaged, and can’t access the recovery mode, that may be the only way to unbrick your board. Follow the steps below.