How to Install Xenon Kodi Build with Screenshots

Screenshots Xenon Kodi Build


Xenon is one best kodi builds for August 2017 and can be installed through Ares Wizard. It has the best top working kodi add-ons. It works great on the Amazon Fire TV Stick Android PC Mac and many kodi devices.
Using a good VPN with Kodi is always suggested for privacy and security. If you need a good low cost VPN to use with Kodi Try IPVanish it has multiple high speed servers with no throttling or logs.
Be sure to have the Unknown Source box checked as Kodi 17 requires this before installing 3rd party add-ons. Read Here for how to Enable Unknown Sources option.
Steps to Install Xenon Kodi Build with Screenshots
Steps 1) Click the System Folder from the top left

Step 2) Click file Manager

Step 3) Click Add Source

Step 4) Click None

Step 5) Enter the following Address:

Step 6) Name it Ares

Step 7) The boxes should match the picture below

Step 8) From the main menu click Add-ons

Step 9) Click the add-on installer browser from the top left

Step 10) Click Install from zip file

Step 11) Click Ares

Step 12) Click

Step 13) It will pop up Ares Project Repository Enabled

Step 14) Click Install from repository

Step 15) Click Ares Project

Step 16) Click Programs Add-ons

Step 17) Click Ares Wizard

Step 18) Click Install

Step 19) It will pop up Ares Wizard installed

Step 20) Go back to home screen and click add-ons

Step 21) Click Program add-ons

Step 22) Click Ares Wizard

Step 23) Click browse builds

Step 24) Click other builds

Step 25) Click Xenon

Step 26) Click install

Step 27) Click Proceed

Step 28) It will download and install

Step 29) Click No

Step 30) Click Again No

Step 31) Click Ok

Step 32) After it installs restart Kodi and it should come up. Be sure to give it time to build menus and update add-ons.


Firmware can be used to update your TV Box device. However, please note that firmware is usually suitable to a specific hardware platform, and if you use it on another non-compatible device of TV box, you may brick your device. For TV Box with Amlogic CPU, you should know this useful tool: Amlogic USB Burning Tool.

Firmware upgrade with USB Burning Tool

This method is used for most firmware distributed online. If you have a single firmware file, normally an .img file or extension, you need to use another Windows tool called USB Burning Tool. If for some reasons, your firmware is badly damaged, and can’t access the recovery mode, that may be the only way to unbrick your board. Follow the steps below.

Know more:
How to Download Amlogic USB Burning Tool
How to Install the Amlogic USB Burning Tool on your PC
Step by step! How to Use the Amlogic USB Burning Tool to Flash Firmware